|
|
| |
 Red
Denotes a Priority Ad |
Date
Submitted |
Location |
| 1 |
|
Chevy parts for sale
I have a pair of small block aluminum Brodix IK200 heads.They have 2.02 int/ 1.60 exh. valves,paid $1200 for the heads and $350 to have them ported and polished.They have very little run time on them.$800 I also have a 3/4 ton s/f rear end out of a 2000 (old body style) GMC truck.It has 3.73 gears with a posi. $250
|
|
11/11/09 |
Mauriceville |
| 2 |
|
|
05-10 Toyota Tacoma Bed Mat
I have 3 Lotridge brand bedmats that fit a 2005 - 2010 Toyota Tacoma double cab short bed.$55
Conatct Clint Rebert @ x-7000
|
|
11/06/09 |
Nederland |
| 3 |
|
CHEVY, DODGE 360 V-8 FORD EXPLORER V-6 99 TRACKER
Parting 2002 Chevy 4x4, motor SOLD! 5 spd trans includes flywheel and clutch $699. Front drive assmy. $599. Doors, steering colum w/keys etc. 99 Chevy Tracker 2.0 motor can here run! 5 speed trans etc. 01 Ford Explorer Sport 4.1 V-6 engine $299. Dodge 360 V-8 can here run $475. Chevy 1995 truck 3/4 ton 350 V-8 $295, trans 4L80E $495, rear end $345. 97 Impala trans low miles $455. Chrysler Seebring trans $295. with computer. Camaro V-6 Auto trans $349.1990 Jaguar XJ6 all or parts $1299.
|
|
09/18/09 |
Beaumont |
| 4 |
|
04/29/09 |
Vidor |
| 5 |
|
|
Wrecked 2500 Silverado
Totaled 2000 Chev Silverado 2500 Long Bed Reg Cab, 350 C.I. 205,000 mi, oil/filter changed every 3000-4000 mi.-Penn 10W30. Auto Trans oil/filter changed every 50000-60000 mi., 373 limited slip diff, Michelin M/S LT 26575R16 White Lettered Tires-approx 3000 miles, 8 hole factory rims. Truck hit on passenger side. Driver's side in good shape. Starter exhaust system bad on passenger side. Has been mechanically checked. Drive train in line and no busted housings. Asking $1000 (tires alone $600)
|
|
11/20/09 |
Buna |
| 6 |
|
|
Mustang Cowl hood & parts
Hardwood 2-1/2 cowl bolt-on fiberglass hood with flush mounted keyed hoodlocks. No cracks are damage in good condition. Black gel coat, has not been painted. Fits foxbody mustangs $275 firm. Two factory ford power leather seats-grey $250. Fuel pump 255 lbs/hr $40. MSD TFI coil $30. Autometer Pro Comp gauges 2-5/8 dia. fuel pressure 0-100 psi $20 & Boost gauge 0-30 psi $20 Please leave message
|
|
11/20/09 |
Port Neches |
| 7 |
|
11/19/09 |
Mont Belvieu |
| 8 |
|
|
early bronco parts
i have a number of various parts for sale..let me know what you need.thanks claude
|
|
11/19/09 |
Beaumont |
| 9 |
|
For Sale 1995 Ford F-150 XLT Truck for Parts
For Sale a 1995 Ford F-150 for parts: Good Body, Good engine (v-8 351), good tires, etc. (bad transmission) $650.00obo I bought my mother a new truck after the transmission went out. I brought this truck home from Arkansas to fix for a second vehicle however the title has been lost so I am selling it as a parts vehicle. If you are interested you call contact me for any additional information or questions that you might have.
|
|
11/19/09 |
Vidor |
| 10 |
|
|
b&m ratchett shifter
bairley used bran new ratchette or regular nice mounted in car never used it $150
|
|
11/18/09 |
Beaumont |
| 11 |
|
|
need some tires and rims.... how about volkswagons i got two
i got a new set of 33x12.50x15inch dayton timberline m/t they got about 100 miles on them with u.s. wheels chrome spoke six hole lugs for older chevy that has a few rust spots on them......650.00 takes them all ....i have two supers one run kind rough and a parts car too one has tile and other dnt 600 bucks gets them both
|
|
11/18/09 |
Buna/Evadale |
| 12 |
|
|
lots of parts
complete nitros kit$400,
1980 vette hood$75,
2000 chevy truck standard 5 speed trans $200,
new 400 sbc part and engine
forged flattop piston 30 over eagle rod 5.7 gear drive solid lift cam and lifters,rings and after market harmonic balancer$1000,
3-ford 9"rearend,1991 mustang parts,2-2 speed power glides,1990 suburban front clip and doors...many other parts,call for prices.
please call cell number listed...
|
|
11/17/09 |
Mauriceville |
| 13 |
|
|
'94 dakota lift kit
I have a used "4 trailmaster suspension lift kit for a '94 dodge dakota. The kit is used. So the ball joints will have to be replaced. Could also use some new paint. Also with the lift: factory front differential and rear axle with 150k miles on them. All for $400.00. And i have a pair of new custom 10" lift rear leaf springs for $300.00.
|
|
11/17/09 |
Lake Charles |
| 14 |
|
|
04 Dodge Ram Parts
Transmission w/65k miles, Complete Interior, Power Heated Mirrors, Front End Components, Right Rear Door, Front Drivers and Passengers Doors.
|
|
11/17/09 |
Vidor |
| 15 |
|
|
Car for sale
2000 Plymouth neon. Not running. Body in good condition. Has cd player w/remote. Will sale whole car, or by parts. Make offer.
|
|
11/17/09 |
Beaumont |
| 16 |
|
|
96 chevy rearend
have a complete rearend from a 96 chevy silverado in perfect working condition for $200obo
|
|
11/17/09 |
Deweyville |
| 17 |
|
11/17/09 |
Beaumont |
| 18 |
|
|
Headers, Trans and misc.
I have two sets of hooker super comp headers, one is for a sbc ($300) and the other is for bbc ($400). They fit a G body car. Also a Milodon gear drive for bbc gen 5 and 6 blocks($250). I have a short tail shaft turbo 400 with trans brake and revs vavle body with a JW ultra bell on it ($1100) firm. The trans was built by Kevin Hilton and has 6 passes on it. If you have any questions call me. Roy
|
|
11/16/09 |
Orange |
| 19 |
|
mustang mufflers
coplete set of roush mufflers for 2005 to 2009 mustang. 750.00 new asking 275.00 email me i will get bake to you.
|
|
11/16/09 |
Mauriceville |
| 20 |
|
|
Chevy truck for parts
I have a 1982 chevy p/u for sale for parts. Short wheel base bed in fair shape. Has a V8 engine (not sure what size) Transmission worked when set up a few years back. Engine ran but knocked. I'm asking 350.00 OBO. No title.
|
|
11/16/09 |
Kirbyville |
| 21 |
|
|
Pontiac motors for sale
Two pontiac 455's complete.
Three pontiac 400's-2 complete,1 shortblock.One pontiac turbo 350 transmission.Three eldebrock intakes. And other misc. parts.For more information call marshalls Garage.
|
|
11/14/09 |
Vidor |
| 22 |
|
11/13/09 |
Groves |
| 23 |
|
|
Axles: Dana 60 FRONT/Corp 14Bolt 1 Ton Chevy
For sale matching set of 1 ton chevy axles Dana 60 front/Corp 14 bolt rear with factory locker: 4.56 ratio. Set $1300. Also Dana 44HD front warn hubs, Detroit locker/ Corp 14 bolt rear, linc locker, DISC Brake conversion; 4.10 ratio. Set $600. 4 speed/Np205 $350.
|
|
11/13/09 |
Hemphill |
| 24 |
|
|
Wanted: '76 Ford F350/E350 front grill
Can you help? Looking for a front grill from older ford. Doing some repairs on 1976 Motorhome with ford E350 front cab. If you have an old parts truck willing to part out I would appreciate the help. (hard to find) Also need to build a rear bumper. Looking for about 8 to 10' of 4 inch pipe.
Thanks for the help. Email or phone is fine.
David
|
|
11/12/09 |
Beaumont |
| 25 |
|
Fox Body Mustang Garage Sale
I have several fox body parts to sell.
1)Very Clean V8 Explorer intake, similar to a cobra intake. $150.....2)Tial Sport 38MM wategate .6 bar (8#) spring. $150...3)V8 Explorer shortblock. Good for a core to rebuild. $100...4)90-93 140 speedo cluster very clean. $100...5)Stock 5.0 fan shroud,fan and radiator(pretty new)$100 for the combo...6)Air bag steering column, leather is fair, airbag is good.$75.7) 89 Mass air harness and A9P ECU. Works perfect for 86-88 SD conversions.$150. Everything OBO
|
|
11/12/09 |
Bridge City |
| 26 |
|
|
suburban and truck for sale
90 chevy suburban truck for sale. motor and trans in good condition. body is wrecked;$500. also 87 chevy truck body for sale. excellent condition. $500
|
|
11/12/09 |
Beaumont |
| 27 |
|
|
MicroTuner
Superchips MicroTuner for 2004 or 2005 Chevy Duramax diesel. Has 3 power settings for added power up to 125 hp and gets 3 or 4 more miles per gallon on the highway. Paid $399 and will sell for $100.
|
|
11/12/09 |
Lufkin |
| 28 |
|
|
1999 dodge ram 1500 parts
i have the front and rear differentials... driver door great condition (no glass) dash board with a few cracks... steering wheel...please email no calls...thank you
|
|
11/11/09 |
Mauriceville |
| 29 |
|
Trail Ready Axles, Tires and Wheels
Dana 44 Front, 6 Lug, High Steer On Pass Side, Complete Hub to Hub, New Warn Locking Hubs, Hydraulic Assist Ram, 5.38 Gears Welded. 2nd axle - Dana 44 Front, 6 lug, 3-Link Setup for Air Shocks,5.38 Gears, Spool Missing Shafts and Locking Hubs. 3rd axle -14-Bolt Semi Float Rear, 6 Lug, 3 Link Setup For Air Shocks, 5.38 Gears, Welded. And 4 - 41x14.50x20 Super Swamper IROKS on 20x10 6 Lug Alluminum Allied Rock-A-Thon Beadlock Wheels. Make offer on Axles. $2300 Tires and Wheels. Call No Text.
|
|
11/11/09 |
Nederland |
| 30 |
|
|
Foxbody stuff
Set of front end lower control arms, new bushings, and ball joints$75, set of stock front springs$30, reproduction front bumper cover 87-93 style LX is not embossed with "mustang" New $150, will take $100, GT rear spoiler Painted Black $50 Bare 302 block out of 89 GT, Will need machine work $50, T-5 bell housing $30
|
|
11/11/09 |
Orange |
| 31 |
|
10 Bolt Chevy Front Axle
10 Bolt Chevy Front axle with 3.73 Gears in it from what i know. Its got everything on it to bolt up but needs rebuild im sure. I Dont know about gears, i think they are new.
Selling as is 100$ Come get it
Also got 2 power steering gear boxes for 73-87 chevy. need rebuilds so selling for 25$ each
Will Trade items for k5 blazer 25 gallon tank in fair condition.
|
|
11/11/09 |
Moss Hill |
| 32 |
|
|
Parting out 1984 Mack
Cab and hood burnt. 6 speed transmission, mack rear ends double-frame. Call for more info
|
|
11/11/09 |
Dequincy |
| 33 |
|
11/11/09 |
Vidor |
| 34 |
|
|
ford parts
Tci sat. night special converter for 1970-up c-4 pan fill with 164 tooth flexplate and 1.375 crank pilot. has a 26 spline input and stalls approximately 2000 rpm $100 obo. Complete 2 1/2 " exhaust for fox body 1 5/8" equal lenght headers + flowmasters with factory stainless tips $200 . Centerforce clutch + pressure plate with stock 5.0 flywheel $75. 77mm pro-flow maf sensor with 30lb. injectors $75. Lunati Voodoo cam+lifters part #lun-61003lk. 227/233 dur. @.050 .522/.538 lift. $125.
|
|
11/10/09 |
Hamshire |
| 35 |
|
|
Front and reae bumpers
Took bumpers off a 2008 Silverado to instal bumper replacements.sell frt. and rear for $250.00 firm note black end caps and black fillers.
|
|
11/10/09 |
Lumberton |
| 36 |
|
11/10/09 |
Deweyville |
| 37 |
|
|
90-97 Dakota tailgate and steering rack
rack and pinion brand new w/ lifetime warrantee (easier than changing inner tie rod ends) has good outers also. Tail gate in good shape. I'll let go cheap, just taking up space in garage. 25 bucks a piece.
|
|
11/08/09 |
Bridge City |
| 38 |
|
11/08/09 |
Little Cypress |
| 39 |
|
11/08/09 |
Nederland |
| 40 |
|
two vehicles for sale
I have a 1996 chrysler cirrus for sale it runs and drives but has a bad body selling for $900.00 also up for sale is a 1995 ford aerostar van it runs and drives and is loaded with all the bells and whistles, no problems selling for $1800.00 both vehicles have titles and good tags
|
|
11/07/09 |
Orange |
| 41 |
|
|
parts for a 2000 expedition
complete front bumper (chrome) $200.00
complete rear bumper $120.00
differential $250.00
chassis $400.00
tail gate $200.00
fuel tank $60
|
|
11/06/09 |
Port Arthur |
| 42 |
|
11/05/09 |
Dayton |
| 43 |
|
|
chevy parts
4L60 auto trany 1998 model 89k miles 375.00 also 1996 rearend $175.00 just give me a call
|
|
11/05/09 |
Vidor |
| 44 |
|
02 Ford F250 bumper & grill
whole front end for a '02 Ford F250 front end. Bumper, Grill, headlights, etc. The only things missing is some bolts. The bumper has 2 small dents. 1 in the front and 1 on the driver side. $500. Call me at the numbers listed & leave message
|
|
11/05/09 |
Moss Bluff |
| 45 |
|
|
Parts for Sale
Chevy 350 block 2 bolt RH dipstick STD $90, Chevy Turbo 400 transmission short tail shaft needs rebuilding $90, Chevy 3 speed manual transmission coarse spline input shaft $make offer
|
|
11/04/09 |
Beaumont |
| 46 |
|
|
Bronco top
I have a top off an 84 full size bronco good glass $100. a passenger fender off 88-98 chevy no dents $25. dual exhaust off square body chevy blazer $25. 265/75/16 buckshot mudder and all terrain goodyear wrangler $15 each.
|
|
11/04/09 |
Mauriceville |
| 47 |
|
|
Everything must go!!!
Motor Cycle Parts and more
DNA Springer front end brand new 4" over stock $500.00 OBO-21" twisted spoke front wheel Dunlop tire $200.00 OBO-Paughco style chopper gas tank $100.00 OBO-GMA Springer front disc brake kit with rotor brand new $250.00 OBO-1992 Jeep Cherokee Sport not pretty but runs $400.00-14' Aluminum boat no motor no trailer $200.00 OBO-1993 GMC Sierra PU 1/2 ton runs $1000.00-11 horse Honda elec start horizontal drive motor $200.00-Victor cutting torch with bottles $200.00 OBO
Misc baby stuff, golf clubs
|
|
11/04/09 |
Vinton |
| 48 |
|
Parting out Camaros
78 has a 305 in it, tons of interior parts, 10 bolt rear axle, etc.
98 is a 6 cyl. automatic., t-tops and more.
|
|
11/04/09 |
Nederland, Beaumont, Golden Triangle |
| 49 |
|
|
Chevy 305
1984 chevy pickup 305 engine with 200R overdrive trans extra 350 trans engine rebuilt 1yr ago truck damaged by IKE lots of good parts runs good $650 with wheels $500 without. Also have tuned port injection system , one bolt hole is drilled big but will still work have all parts $200 Clear title for truck
|
|
11/03/09 |
Hull |
| 50 |
|
|
Rebuilt 4l60e and many others with warranty
Many rebuilt Chevrolet 4l60e transmissions with warranty.
1993-1998 Single piece case 650.00
1997-present two piece case 750.00
All with new torque converter
All transmissions come with one year 12000 mile warranty.
Also high performance builds available any were from tow to drag cars, very reasonable call for prices.
Also rebuilds available on any automatic trans, if pulled I can pick up and deliver for free. credit cards welcome
|
|
11/02/09 |
Sulphur |
| 51 |
|
|
mustang part's
built 8.8 with 410 gears 31 spline moser axles with spool trick flow girdle and a set of wheels 302 engine and other part's
|
|
11/02/09 |
Vinton |
| 52 |
|
|
ford parts
paxton fmu 20.00, mustang compressor 35.00, upper and lower intake 40.00, t -5 core 20.00, bell housing 30.00, brake and clutch pedal 25.00, four 22" tires 305-65-22 75 all four two good.
|
|
11/01/09 |
Beaumont |
| 53 |
|
|
Chevy 350 heads
Centerbolt heads with 2500 miles.
great condition, can send pics if need.
$250 or trade, call, email, or text
|
|
10/30/09 |
Orange |
| 54 |
|
|
06 F250 King Ranch Leather Interior
I have an interior out of 2006 King Ranch F250. I have front bucket seats (both power/heated), center console, rear bench seat w/ fold out tray underneath, and all four door panels complete with all switches. This would be perfect for upgrading your current interior to King Ranch. If you've looked, you know what these things sell for. They are all in excellent shape. I'll take $2500 for everything. May be interested in partial trade or black or grey leather seats. Preferably split bench.
|
|
10/29/09 |
Beaumont |
| 55 |
|
|
89 Chevy Rear end
I have a rear end out of an 89 half ton truck with a 3.08 gear, rebuilt holley Carb, saginaw 4 speed out of a early 70s camaro i believe. But im looking for a rear end that will fit in a 80 -86 chevy half ton with a decent gear, email me or give me a call after 5
|
|
10/28/09 |
Lumberton |
| 56 |
|
10/28/09 |
Deridder |
| 57 |
|
8.5 10bolt posi / 5 lug wheel adapters
gm 8.5 10 bolt posi chunk for 78-87 truck or 87-91 suburban/ fullsize blazer $75, bought a few years ago and changed direction of project,..,.,.,.,.,. 5 lug wheel adapter for 5x4.5 wheel to 5x4.75 vehicle. $50
|
|
10/26/09 |
Westlake |
| 58 |
|
|
Motor Parts
350 Block STD.,Eagle CrankSBC. 3.750" 2pc new in box,Eagle I Beam Rods New in box,Speed Pro Flat top pistons new in box,rings,rodbearings, &mainbearings, Lunati vodoo cam 300/515 242/242.50 Chevy 882 ported heads 202 x1.60 z28 springs 2 sets of roller rockers Holley 750 carb Edelbrock 750 carb performer RPM intake, 2 sets of tall valve covers call cell please
|
|
10/26/09 |
Silsbee |
| 59 |
|
|
1986 chevy suburben glass
doors not in best shape but glass is good 12$ per door, also have tailgate 20$side windows20$a piece few other chevy parts every thing goes quick or will be hauled off to scrap yard and windows will be busted
|
|
10/26/09 |
Vidor |
| 60 |
|
Nissan Titan Floor Mats
Original Equipment Manufacture (OEM) floor mats for a Nissan Titan. The mats are NEW and have not been used. Color is Grey. First $50 cash takes them home. Call number listed below for more information.
I also have new floor mats available for the back seat of a Nissan Titan King/Crew Cab.
Nissan Genuine Part (Part # 26430-7S060)
|
|
10/25/09 |
Bayway |
| 61 |
|
10/24/09 |
Port Arthur |
| 62 |
|
Quick fuel 750, 700r4 and sb2 heads
This is a quick fuel 750 q series carb. It has mechanical secondaries, screw in air bleeds, 4 corner idle adjustment, billet metering blocks etc. This is barely used. Needing bigger carb. 450.00 firm. I also have a 700r4 transmission that needs to be rebuilt case and gears are fine. Sell it with a 2300 stall converter for 200.00 obo. Have more pics upon request. Also set of sb2 heads bare castings with intake. 980.00
|
|
10/24/09 |
Kirbyville |
| 63 |
|
10/24/09 |
Westlake |
| 64 |
|
10/24/09 |
Colmesneil |
| 65 |
|
|
2002 Chevrolet HD front grill
I'm looking for a 2002 Chevrolet HD front grill in good condition. I especially need the chrome long piece that goes from headlight to headlight, but I'll take the whole grill if thats what you have. Call or e-mail
|
|
10/24/09 |
Port Neches |
| 66 |
|
|
Dodge 2003-2008 HD Dynatrac "free spin"
Dynatrac Stage 1.
4x4 Front Axle "Free Spin" Conversion Kit, for 2000-2008 Dodge 2500-3500 Heavy Duty.
Brand new, still in original boxes Everything just as, all there. Opened to look at. Closed the boxes till I got ready. Still not ready. Too good to just sit there.
Includes" WARN" selectors.
Check out Dynatrac Products Web site for Conversion Kits. All info there. This is exactly what is shown.
Bought for a 2006 HD Diesel
$1550.00
|
|
10/23/09 |
Orange |
| 67 |
|
64-65-66 Chevy truck parts
230 cid inline 6 cylinder engine - $300.00;
3 speed manual transmission - $150.00;
rear stepside fenders - $75.00 ea;
front fenders - $50.00 ea ;
hood (needs work) - $50.00;
2 gas tanks - $50.00 ea;
doors - $50.00 ea;
This is a donor truck for the one I'm restoring. other parts will come available soon. email if interested.
|
|
10/22/09 |
Dayton |
| 68 |
|
|
Chevy & Ford parts
1993-2002 Chevy Camaro Z28 radiator & front n rear sway bars $150. obo for all or $75 for rad. & $75 for both sway bars. 3 Stock 2006 F150 rims with descent tires 30-40% tread left $50 for set [will not sell seperate]. Also have lots 1980-'87 chevy 1/2 ton truck parts please call for prices on them if no answer please leave a message or voice mail and will return call asap
|
|
10/22/09 |
Orangefield |
| 69 |
|
10/22/09 |
Baytown |
| 70 |
|
94 Trans Am parts plus more!
From small to large, tons of parts! Call to find out if I have the part you need! No engine or transmission. CALL before someone else does! Parting out car!
|
|
10/22/09 |
Beaumont |
| 71 |
|
Mustang 5 lug conversion
I have here a set of front spindles off of a 1996 mustang GT that would be great for a front 5 lug swap on a 87-93 mustang. $75 obo
|
|
10/21/09 |
Beaumont |
| 72 |
|
|
Need Gas? We've Got Cash!
We buy junked, wrecked, and flooded vehicles......running or not! Please contact Steve. Thank you and God Bless!
|
|
10/19/09 |
Orange |
